The SuperMax 25-50 drum sander is the largest open-ended drum sander on the market. Sand 25" in a single pass and up to 50" in a double pass. Expand the scope of projects you're able to complete, while increasing speed and consistency in which you're able to do them. The 25-50 drum sander comes standard on the closed mobile base stand. The drum is pre-wrapped with 80 grit sandpaper. Additional accessories and sandpaper are available for purchase. Features: • Simple alignment feature: Just one nut will adjust the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy • Indexed alignment setting: It has an indexed alignment setting for narrow and wide stock. When sanding stock wider than 25?, the index lever will properly adjust the conveyor for flawless wide sanding • Easy height adjustments: A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments • Drum will never go ?out of alignment?: The drum carriage is bolted to the base, preventing any movement or alignment issues Additional Features: • INTELLISAND Technology: Automatically adjusts conveyor speed based on load • Prevents gouging, damaging or burning stock • Provides consistent finish even with varying grain pattern and density • Greatly increases abrasive planning and dimensioning speed • Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no "flex" in conveyor, guaranteeing flatness to less than .010? across the width of the sander • Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner • Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap • Easiest access to abrasive fastening system of any drum sander! Extra wide space to access fasteners to eliminate need for special tools • Self-cooling drum prevents overheating and extends abrasive life • Tension rollers are adjustable in height and hold down pressure, eliminating snipe • Excellent dust extraction as dust cover is formed to shape of drum • Metal, not plastic, is formed to maximize air flow and dust extraction • Heavy-duty cast iron construction for strength, rigidity and reduced vibration • Mobile Base allows for stand and machine to be to moved easily Machine Specs: Sanding Capacity Maximum Width: 50" Minimum Length: 2-1/4" Maximum Thickness: 4" Minimum Thickness: 1/32" Dimensions (D x W x H): 27" x 46" x 53" Drum Speed: 1740 RPM Dust Hood: 1- 4" vacuum port, min. 600 CFM recommended Conveyor Motor: 43" -lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM Drive Motor (TEFC): 1-3/4 HP Power Requirements: 110 V 20 amp
